MOTORBIKE ALARM KEMO M073N
Switches automatically a horn or a siren on, if the motorbike should be moved from a parking position to any other one. A waterproof and shakeproof sealed module. Also to be use to protect any other objects, which are not to be moved.
The module has to be fixed in a suitable place of the object to be supervised (motor-bike, scooter, etc.) in accordance with the following instruction: There is a position-dependent sensor at the inside of the module, which switches on in horizontal position and switches off if tilted laterally (no matter in which direction). So the module has to be mounted in such a manner that it lies in horizontal position in alarm condition (see drawings). In order to set the module to quiescent condition it must be tilted by at least 15°! The module may directly switch a current up to max. 1 A at voltages from 1 to 25 V/DC. So you may connect smaller scooter horns or electronic sirens directly. If you want to connect horns or lamps with a higher current consumption it is necessary to interpose a commercial car relay. The module M073N activates the relay and then it is possible to switch loads up to 20 A with the relay contact depending on the size of the relay.