SOLAR CHARGING REGULATOR DUAL KEMO M174 12V 16A
To be connected between a solar panel 12 V/DC and 1 or 2 batteries in order to avoid an overload of the batteries. If 2 batteries are connected, they are charged separately from each other. The battery with lowest charging voltage always receives more charging current.
The cables should be kept as short as possible. Furthermore, the cables must be adjusted to the charging current. The charging regulator should be mounted as close as possible to the battery (the cable length should be preferably < 1 m). Depending on the load the module heats up. The heat is dissipated from the aluminum plate at the bottom of the module. Under certain circumstances it must be mounted on a cooling surface according to installation instructions.