BATTERY GUARD KEMO M148-24 12/24V

Protects car batteries against total discharge by switching off consumers such as refrigerator boxes, heatings, etc. in time. It switches on again automatically when the normal voltage returns. Automatic detection of the battery (12 or 24 V).
 

The module has to be installed in such a manner that it is not exposed to humidity, strong vibrations or great heat. The module should be mounted as close as possible to the accumulator (short cable connection). Reason: Voltage losses may occur in the cable if the cables are too long and higher currents flow. The module may heat up depending on the load. It therefore has to be mounted in a well ventilated place! Please do not mount in heat insulated places! The module case must not exceed a temperature of 50°C during operation (otherwise it has to be cooled with a small ventilator).