TEHNOSHOP.NET, Soteška pot 21, 1231 Ljubljana-Črnuče, 031 / 028-128, ljubljana@tehnoshop.net

KOMPLET PARKIRNIH SENZORJEV STEELMATE PTS411-EX BTI
KOMPLET PARKIRNIH SENZORJEV STEELMATE PTS411-EX BTI
KOMPLET PARKIRNIH SENZORJEV STEELMATE PTS411-EX BTI
KOMPLET PARKIRNIH SENZORJEV STEELMATE PTS411-EX BTI

KOMPLET PARKIRNIH SENZORJEV STEELMATE PTS411-EX BTI

4x s piskačem (zadnji ali prednji)
Šifra:
SPTS411-EX BTI
EAN:
Cena z DDV:
105,90 €
DODAJ V KOŠARICO

Parking assistant STEELMATE with the option to install as  Rear or Front, with 4 flush sensors 16mm black sensors and buzzer. Dual intelligent functions for cars with tow-bar, spare wheel or other protrusion. New functions of sensitivity settinglearning function, buzzer with adjustable volume and tone frequency added. The unit is designed for 12V/24V on board voltage cars. The length of the wires to the sensors is 2.3 m.
 

When installing the parking assist in the front bumper, it is necessary to use EXT CABLE KIT extension cables.
 

System Description:

  • sensors with fixed assembly to the bumper
  • fast obstacle detection
  • sound alarm (beeps changing frequency) indicates the position of obstacles
  • excellent coverage of the entire area behind or before the vehicle
  • when is the obstacle at a distance of 30 cm from the vehicle, you will hear a continuous tone
  • auto detection (automatic identification of the defective sensor)
  • excellent coverage of the entire area behind the vehicle, horizontal scan angle of 110° ± 15°
  • mounting hole 16 mm
  • sensors supplied with 10 cm lenght cable and waterproof connector that ensures easy replacement if necessary
  • the length of the wires to the sensors is 2.3 m
  • adjustable volume directly on the buzzer body (3 levels)
  • adjustable frequency directly on the buzzer body (2 levels)
  • adjustable sensitivity of the sensors on the control unit (2 levels)
  • the unique learning function (ignoring permanent obstacle - tow bar, spare wheel, frame, ...)
  • with additional ACC wire (pink wire) for stable power supply(optional connection)
  • control unit is not waterproof, must be installed in dry place
     

Note: The control unit contains a 3 PIN connector for displayconnection, display with old 8 PIN connector is not compatible!

Piškotki za analitiko
Ti se uporabljajo za beleženje analitike obsikanosti spletne strani in nam zagotavljajo podatke na podlagi katerih lahko zagotovimo boljšo uporabniško izkušnjo.
Piškotki za družabna omrežja
Piškotki potrebni za vtičnike za deljenje vsebin iz strani na socialna omrežja.
Piškotki za komunikacijo na strani
Piškotki omogočajo pirkaz, kontaktiranje in komunikacijo preko komunikacijskega vtičnika na strani.
Piškotki za oglaševanje
So namenjeni targetiranemu oglaševanju glede na pretekle uporabnikove aktvinosti na drugih straneh.
Kaj so piškotki?
Z obiskom in uporabo spletnega mesta soglašate z uporabo in beleženjem piškotkov.V redu Več o piškotkih