Parking assistant STEELMATE with the option to install as Rear or Front, with 4 flush adjustable sensors 16 mm and Display M7. Dual intelligent functions for cars with tow-bar, spare wheel or other protrusion. New functions of sensitivity setting, learning function. The unit is designed for 12V/24V on board voltage cars.
When installing the parking assist in the front bumper, it is necessary to use EXT CABLE KIT extension cables.
System Description:
- adjustable recessed sensors 16mm
- sensors with fixed assembly to the bumper
- fast obstacle detection
- sound and visual alarm indicates the position of obstacles
- excellent coverage of the entire area behind or before the vehicle
- when is the obstacle at a distance of 30 cm from the vehicle, you will hear a continuous tone
- auto detection (automatic identification of the defective sensor)
- excellent coverage of the entire area behind the vehicle, horizontal scan angle of 110° ± 15°
- sensors core diameter 14 mm
- mounting hole 16 mm
- sensors supplied with 10 cm lenght cable and waterproof connector that ensures easy replacement if necessary
- adjustable sensitivity of the sensors on the control unit (2 levels)
- the unique learning function (ignoring permanent obstacle - tow bar, spare wheel, frame, ...)
- with additional ACC wire (pink wire) for stable power supply(optional connection)
- control unit is not waterproof, must be installed in dry place
- length of wires to sensors 2.3m
Note: The control unit contains a 3 PIN connector for displayconnection, display with old 8 PIN connector is not compatible!
